Since 1960, Almcoe has kept Dallas area Hussmann rack systems, condensing units, and display cases running through Texas summers topping 100°F. When your Hussmann equipment fails, our factory-trained techs respond fast with the parts and expertise to restore temperatures.
Response within 2 hours. Emergency calls dispatched immediately.
Since 1960, Texas businesses have called Almcoe when they need commercial refrigeration done right the first time.
We started repairing Hussmann systems in 1960 when Dallas grocery stores first installed multi-deck cases. That depth matters when diagnosing phantom compressor short cycles on hot afternoons or tracking down intermittent solenoid failures in rack systems serving stores in Uptown, Deep Ellum, and Bishop Arts. Our senior techs have seen every Hussmann failure mode and carry the diagnostic tools to pinpoint problems fast, reducing your downtime and product loss.
Our technicians are EPA Section 608 certified and trained specifically on Hussmann rack architecture, parallel compressor controls, and defrost circuits. We stock OEM Hussmann components at our Cresthill Road facility including expansion valves, EPR regulators, contactor coils, and anti-sweat heater elements. When a Hussmann condensing unit trips on high head pressure during a July heat wave or evaporator coils ice over in your walk-in, we arrive with the right parts and knowledge to fix it correctly the first time.
Many Dallas Hussmann systems still run R-404A and require conversion planning as supplies tighten and costs climb past $800 per cylinder. We handle refrigerant transitions to R-448A, R-449A, and R-454C on Hussmann racks and condensing units, performing oil compatibility checks, replacing filter driers, adjusting expansion valves, and updating system labels per EPA regulations. Whether you need emergency repair or planned refrigerant upgrades, we keep your Hussmann equipment legal and efficient.
“Hussmann rack went down on Saturday morning. Almcoe had a tech here in 90 minutes, found the failed contactor, and we were back cold before lunch rush.”
“Our Hussmann display cases weren't holding temp in the Texas heat. Almcoe found low refrigerant and a pinhole leak in 30 minutes. Repaired and recharged same visit.”
“Needed anti-sweat heaters replaced on six Hussmann doors. Almcoe scheduled it after hours, finished by opening, and left no mess. Professional crew.”
We repair all Hussmann commercial refrigeration equipment including parallel rack systems, remote condensing units, evaporator coils, reach-in and walk-in cases, anti-sweat door heaters, and electronic expansion valves. Our techs diagnose compressor failures, refrigerant leaks, defrost issues, control board problems, and high head pressure conditions. We service Hussmann equipment across Dallas including Deep Ellum restaurants, Uptown retail, Bishop Arts markets, and grocery chains throughout DFW. Every truck carries common Hussmann OEM parts for faster repairs.
We average 2-hour response across the Dallas metro area for emergency Hussmann repairs. Our 24/7 dispatch at (214) 949-8674 routes the nearest qualified tech to your location, whether you're in downtown Dallas, Las Colinas, Legacy West, or the Entertainment District near AT&T Stadium. During Texas summer heat when Hussmann condensers work hardest, we prioritize calls with rising case temperatures to prevent product loss. Most repairs are completed same-visit with parts from our Cresthill Road warehouse stock.
Diagnostic service calls start at $175 to $225 depending on time and location. Common Hussmann repairs range from $350 for a failed contactor or relay to $1,200 for compressor replacement in a condensing unit. Rack system repairs involving multiple compressors or control boards run $800 to $2,500 depending on complexity. Refrigerant recharge costs vary with type: R-404A, R-448A, and newer blends have different pricing, currently $150 to $400 for typical top-offs. We provide written estimates before starting work over $500.
We regularly service Hussmann parallel rack systems with 3 to 8 compressors, remote condensing units for walk-ins and prep tables, and evaporator coils in multi-deck display cases. Common repairs include replacing failed scroll compressors, EPR valves sticking open, electronic expansion valve calibration, defrost timer or termination issues, and anti-sweat heater element burnout on glass doors. We also handle suction and discharge line insulation, condenser coil cleaning critical in Dallas dust and pollen, and control board replacement for older Hussmann case controllers.
Yes, we service Hussmann refrigeration throughout North Texas including Fort Worth (Stockyards, Sundance Square, West 7th), Arlington (AT&T Stadium area), Plano (Legacy West, Downtown), Irving (Las Colinas), and Frisco (The Star, Stonebriar). Our primary service area covers all of DFW metro, and we regularly travel to locations across Texas for commercial clients with multiple Hussmann installations. Call (214) 949-8674 to confirm service availability for your specific location and equipment type.
Absolutely. Commercial refrigeration emergencies don't wait for business hours. We provide 24/7/365 Hussmann repair service across Dallas and DFW. A rising case temperature at 2 AM or a failed rack compressor on Sunday can cost thousands in spoiled product. Our on-call technicians carry fully stocked trucks and respond to after-hours emergencies with the same parts inventory and diagnostic equipment as daytime calls. Evening and weekend service includes a trip charge premium, but we prioritize getting your Hussmann equipment back to safe temperatures as quickly as possible.
Not listed? Call us
Fill out this form and we respond within 2 hours. Emergency? Call (214) 949-8674 now.
Response within 2 hours. Emergency calls dispatched immediately.
Call (214) 949-8674. Texas technicians available 24/7. We protect your inventory.
